Automatiska slīpmašīna Locatelli Orientalmatik 1350 |
|
| There are six stations with a rotating drum, and the machining process goes through the following stages: | |
| 1- Turned pieces loaded from hopper and clamped; 2- Course profile sanding with belt; 3- Fine profile sanding with belt; 4- Course brush back sanding; 5- Fine brush back sanding; 6- Ejection of sanded piece. | |
| On request, an electromagnetic brake can be fitted for stopping the spindle before unloading. The course and fine belts are used for sanding the simple contours of the turning. The machine will sand: 1 - On either the forward or the return stroke only; 2 - Both in the forward and return strokes. | |
Orientalmatik | |
| The adjustable oscillating and stroking brushes are used for sanding the more complicated sections of the turnings. | |
| Copying following a timber | This is a machine suitable for sanding pieces with a maximum length of 1350 mm. max diameter 140 mm. and square of max. 100x100 mm. It can be supplied for a work length of 1600 mm., max. diameter 170 mm. and square section of max 120xl20 mm. Spindle motor 4 HP, 1400 rpm and 3 speeds. On request spindle motor can be supplied with a double speed. |
| Device for long and slender pieces | Pump motor 1,5 HP, 1500 rpm. Gear motor for brush rocker 0,5 HP, 1400 rpm. Belt motor 1,5 HP, 2800 rpm. Compressed air supply: 6-7 bar. Gross weight 3250 Kg. Net weight 2670 Kg. |
Sea packing 320 x 150 x h. 237 cms. The overall noise level of the machine is below 85 decibels. | |
